Respuesta a: VTP version 3

NUESTROS CURSOS Foros CCNP 350-401 ENCOR VTP version 3 Respuesta a: VTP version 3

#35996
AlvaroM
Superadministrador

Hola José, tu afirmación es correcta.

Si ejecutamos show version podrías obtener la Base MAC address:

SW1#show version
!output omitted
cisco WS-C3560-48TS (PowerPC405) processor (revision G0) with 131072K bytes of memory.
Processor board ID FDO1405X15Z
Last reset from power-on
2 Virtual Ethernet interfaces
48 FastEthernet interfaces
4 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 30:37:A6:79:7F:00
Motherboard assembly number     : 73-9898-09
Power supply part number        : 341-0097-02
Motherboard serial number       : FDO14050UXN
Power supply serial number      : DCA13528K8B

Si ejecutas show vtp status, verás ese mismo valor:

SW1#show vtp status
*Apr  3 18:00:00.989: %SYS-5-CONFIG_I: Configured from console by consolestatus
VTP Version capable             : 1 to 3
VTP version running             : 3
VTP Domain Name                 : cisco
VTP Pruning Mode                : Disabled
VTP Traps Generation            : Disabled
Device ID                       : 3037.a679.7f00
30:37:A6:79:7F:00

Saludos! =)

  • Esta respuesta fue modificada hace 1 mes, 3 semanas por AlvaroM.
  • Esta respuesta fue modificada hace 1 mes, 3 semanas por AlvaroM.